Community - Forum
It is currently Sun Apr 22, 2018 1:59 pm

All times are UTC - 8 hours




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Looking for...
PostPosted: Wed Aug 06, 2014 12:38 pm 
Offline

Joined: Tue Mar 19, 2013 5:16 pm
Posts: 97
An OLDER version of ez caddy, not the newer one. it does not work right. Thanks in advance.


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Wed Aug 06, 2014 1:56 pm 
Offline
User avatar

Joined: Tue Aug 09, 2011 9:28 am
Posts: 3702
This one is not the one you want ? ( http://www.kolumbus.fi/sakari.aura/bin/ ... o_403f.zip)

I have version EzCaddy_Pro_401 and version EzCaddy_Pro_400rc1 on my pc still .. sent me a pm if you need it

_________________
┌─┐
┴─┴ Need help???
.ಠ_ರೃ Use a link from below!


News: http://shotonline.gamescampus.com/news/notice
Events: http://shotonline.gamescampus.com/news/events
DQ&A: http://shotonline.gamescampus.com/support/qnawrite


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Wed Aug 06, 2014 5:02 pm 
Offline

Joined: Fri Oct 01, 2010 9:37 am
Posts: 72
Frank

Either your pm is not working or there is a problem with the board


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Thu Aug 07, 2014 12:07 am 
Offline
User avatar

Joined: Tue Aug 09, 2011 9:28 am
Posts: 3702
I see it yeah .... pm system is broken... failure in the submitt form....
I will inform the team so webdevs can fix it.

_________________
┌─┐
┴─┴ Need help???
.ಠ_ರೃ Use a link from below!


News: http://shotonline.gamescampus.com/news/notice
Events: http://shotonline.gamescampus.com/news/events
DQ&A: http://shotonline.gamescampus.com/support/qnawrite


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Thu Aug 07, 2014 8:50 am 
Offline

Joined: Tue Mar 19, 2013 5:16 pm
Posts: 97
thanks silence:) I will try it anyways.


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Thu Aug 07, 2014 10:42 am 
Offline

Joined: Tue Mar 19, 2013 5:16 pm
Posts: 97
I have the program.... but the numbers do not change when I apply wind, sand, etc, my yards stay the same. Any ideas?


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Fri Aug 08, 2014 6:33 am 
Offline

Joined: Fri Oct 01, 2010 9:37 am
Posts: 72
schmack88 wrote:
I have the program.... but the numbers do not change when I apply wind, sand, etc, my yards stay the same. Any ideas?


My guess would be have you entered numbers in the settings sheet?


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Fri Aug 08, 2014 11:32 am 
Offline

Joined: Tue Mar 19, 2013 5:16 pm
Posts: 97
I entered the number in the chart section.... I used ez caddy a lot in the years, but now it is different. :( still numbers stay same.


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Fri Aug 08, 2014 11:37 am 
Offline
User avatar

Joined: Tue Aug 09, 2011 9:28 am
Posts: 3702
wich version do you use now ?

_________________
┌─┐
┴─┴ Need help???
.ಠ_ರೃ Use a link from below!


News: http://shotonline.gamescampus.com/news/notice
Events: http://shotonline.gamescampus.com/news/events
DQ&A: http://shotonline.gamescampus.com/support/qnawrite


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Fri Aug 08, 2014 1:12 pm 
Offline

Joined: Fri Oct 01, 2010 9:37 am
Posts: 72
schmack88 wrote:
I entered the number in the chart section.... I used ez caddy a lot in the years, but now it is different. :( still numbers stay same.


If you are using 4.03 or something like that, next to the chart tab is Settings, you need to imput the relevant numbers.


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Mon Aug 11, 2014 7:51 pm 
Offline

Joined: Tue Mar 19, 2013 5:16 pm
Posts: 97
I got hold of an older version... v2.92 .... and it works proper.... I tried 4.03 and 3.xx something.... neither worked proper.... v2.92 works perfectly. :)


Top
 Profile  
 
 Post subject: Re: Looking for...
PostPosted: Thu Jun 02, 2016 7:05 am 
Offline
User avatar

Joined: Wed Dec 31, 1969 4:00 pm
Posts: 62
Location: Finland
I knoiw this is old thread and such, but would like to give hint for all those still running really old versions (which at the time were shareware).

You are still able to open those in _unregistered_ mode (button at bottom of startup page) and go to file sheet, where u can actually export the settings u have in there.

This exported settings file will be compatible with the latest version of EzC (currently 4.043) and give you the basic setup for calculations.

Obviously current EzCaddy is quite a bit different than those earlier version, which supported only no spin and back spin. Current version has adjustable top/bottom spins and sidespins. There are some new settings and more complex calculation formulas for example elevation correction. Base calculations are still the same tho.

Personally I am extremely happy with the performance of 4.043 so I strongly recommend updating to that. Also it is 100% free without any nag screens or other limitations and does all the stuff those early versions did. Can not see any reason using those old versions instead. New version also works with 64bit excel.

I also recommend that u guys share your settings files and charts with each other so that charting/configuring becomes less of an effort. Unfortunately I don't have a place for you to upload those. However that is how I originally wanted people to do and the settings import/export feature is highly tuned just for that purpose.

_________________
Author of EzCaddy Pro project (2005-2016)
Old school Shot Online player who enjoys the game play over the levelling and stats.
Strong supporter of the "monthly membership fees down"-act.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 8 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for: